TAMU Homepage TAMU Libraries Homepage TAMU Digital Library Homepage

Multi-port DC-DC Power Converter for Renewable Energy Application

Show full item record

Title: Multi-port DC-DC Power Converter for Renewable Energy Application
Author: Chou, Hung-Ming
Abstract: In recent years, there has been lots of emphasis put on the development of renewable energy. While considerable improvement on renewable energy has been made, there are some inherent limitations for these renewable energies. For example, for solar and wind power, there is an intermittent nature. For the fuel cell, the dynamics of electro-chemical reaction is quite slow compared to the electric load. This will not be acceptable for modern electric application, which requires constant voltage of constant frequency. This work proposed and evaluated a new power circuit that can deal with the problem of the intermittent nature and slow response of the renewable energy. The proposed circuit integrates different renewable energy sources as well as energy storage. By integrating renewable energy sources with statistical tendency to compensate each other, the effect of the intermittent nature can be greatly reduced. This integration will increase the reliability and utilization of the overall system. Moreover, the integration of energy storage solves the problem of the slow response of renewable energy. It can provide the extra energy required by load or absorb the excessive energy provided by the energy sources, greatly improving the dynamics of overall system. To better understand the proposed circuit, "Dual Active Bridge" and "Triple Active Bridge" were reviewed first. The operation principles and the modeling were presented. Analysis and design of the overall system were discussed. Controller design and stability issues were investigated. Furthermore, the function of the central controller was explained. In the end, different simulations were made and discussed. Results from the simulations showed that the proposed multi-port DC-DC power converter had satisfactory performance under different scenarios encountered in practical renewable energy application. The proposed circuit is an effective solution to the problem due to the intermittent nature and slow response of the renewable energy.
Subject: Multi-port
DC-DC Power Converter
Renewable Energy Integration
URI: http://hdl.handle.net/1969.1/ETD-TAMU-2009-08-837
Date: 2009-08


Chou, Hung-Ming (2009). Multi-port DC-DC Power Converter for Renewable Energy Application. Master's thesis, Texas A&M University. Available electronically from http : / /hdl .handle .net /1969 .1 /ETD -TAMU -2009 -08 -837.

Files in this item

Files Size Format View
Chou.pdf 1.682Mb PDF View/Open

This item appears in the following Collection(s)

Show full item record